SANKON Building Materials Technology Co. LTD is a one stop
solutions provider for autoclaved aerated concrete (AAC) production
equipment including complete AAC production lines.
We manufacture a wide range of building material machines,
including block making machines, concrete panel machines, dry
mortar machines, and more.
Our main products include AAC block production line,ALC panel
production line,ALC panel production installation of cinstruction
equipment and their matched equipment.
The dust collector on the top of the warehouse is to collect dust
and discharge clean air into the cement tank, so that there is no
negative pressure in the warehouse and the storage pressure of the
ash warehouse is reduced.When the bulk cement pump truck sends
powder to the warehouse, there is a certain pressure difference
between the inside and outside of the cement warehouse, the gas is
discharged from the warehouse inside and outside, and the dust is
filtered by the filter cartridge to achieve the effect of purifying
the air.When the screw machine to the use of mechanical feed, the
pressure in the bin is less than the atmospheric pressure so that
the air to the bin, so that the screw normal work within the scope
When the dust collector works at the top of the warehouse, the dust
gas enters the filter chamber through the lower open flange, and
the coarser particles directly fall into the ash bin. The dust gas
is filtered through the filter bag, and the dust is retained in the
bag meter. The clean gas passes through the bag mouth to the clean
air chamber and is discharged into the atmosphere by the fan.When
the dust on the surface of the bag increases from time to time, the
program controller starts to work and opens the pulse valve one by
one to make the compressed air stop blowing and clean the bag
through the nozzle, which makes the bag shrink suddenly. Under the
effect of the reverse air flow, the dust attached to the bag meter
quickly leaves the filter bag and falls into the ash bin, and the
dust is discharged by the ash discharging valve.When using the top
of the filter bag with high-speed jet air flow, it is blown into
the inside of the filter bag to form the air wave, which causes the
filter bag to expand sharply and impact and vibration from top to
bottom, producing a strong effect of dust removal.The pulse ash
cleaning effect is stronger, the effect is better, and the filter
wind speed can be improved.It is a good way to clear the ash.
Dust collector installation process:
1. When the dust remover equipment is lifted, attention should be
paid to avoid damaging the box body and accessories.The aperture of
the filling roof must be smaller than that of the dust
collector.And welded to the ash storage filling roof.
2. Switch on the induced draft fan.
3. Connect the air compressor and connect the soft connection to
the gas storage tank of the dust collector.
4. Before installation, inspect all parts of the dust collector to
see if they are in good condition. If missing, damaged or deformed
parts are found, repair and repair them before installation.
5. Sealing packing should be inserted between each flange of the
dust collector to tighten bolts, ensure reliable sealing of the box
body, and prevent air leakage.
6. The filter bag must be fixed vertically in the dust catcher and
installed in a compact way, with the bag mouth stuck on the flower
7. The connection of air bag and electromagnetic pulse valve spray
pipe should be sealed reliably without air leakage.
Packing & Shipping:
Package conforms to the requirements of customs.
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe
3.Our expert will answer any inquiry within 24-48 hours and it will
be solved as soon as possible.
4.We supplies the complete technical documents and the relative
drawings of the electric components which were written in Chinese
5.Service is available lifelong.