The AAC production process includes raw material preparation,
batching and mixing, pouring, precuring, cutting, autoclaving, and
packing. With decades of experience in serving the AAC blocks
production machinery industry, we can supply customers with quality
AAC block production lines with capacity ranging from 100,000m3 to
400,000m3 per year.
Separator is an important part of the aerated concrete equipment,
it has the gantry frame, longmen rack is equipped with motor
reducer, brake, sprocket gear and oil pump, gantry frame on both
sides along the length direction in sets under beam and beam, beam
and beam under connection by snapping suet cylinder, beam and beam
under respectively on a relative layout of clamping cylinder, beam
on the beam under the clamping cylinder and the clamping cylinder
on the up and down, sprocket drive chain and under beam connection,
oil pump through hydraulic line respectively with break and suet
cylinder clamping cylinder is linked together,The front end of the
clamping cylinder is equipped with a clamping body.The utility
model can mechanically separate the cut shaped concrete blocks
along the slit and restack them together, which is not easy to
damage the concrete blocks and has high production efficiency.The
Separator of aerated concrete equipment is used to pull off the
blank body of the vertical discharge tank from layer to layer by
mechanical completion. The machine is installed at the conveying
end of aerated concrete finished products, and the process of
pulling off can be completed automatically.
1. The equipment is simple and convenient to operate. The cutting
process (flip, vertical and horizontal) of this model is completed
at different stations, so the work at each station is simplified
and the operation and maintenance is convenient.
2. In addition to producing blocks, this machine also produces
plates, and cuts the blank body on six sides, so the product
quality is not affected by the coating oil and mold deformation;
3. After the billet is erect, both sides (600mm wide) can be cut
longitudinally in the billet, and milling grooves can be completed
at the same time. There is no need to equip with groove processing
4. Simple and practical structure, easy to install and maintain;
5. Make the blank body 600mm in width and 1200mm in height after
the body is turned upright. In this way, the cutting steel wire is
shorter, so it is not easy to break, drift and cut with high
6. The longitudinal cutting device is fixed, and the blank body
walks on the cutting trolley to complete the longitudinal
cutting.The horizontal crosscutting device adopts the chain drive
to keep the cross cutting frame lifting drive consistent and ensure
the cutting accuracy.
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe
3.Our expert will answer any inquiry within 24-48 hours and it will
be solved as soon as possible.
4.We supplies the complete technical documents and the relative
drawings of the electric components which were written in Chinese
5.Service is available lifelong.
-The factory used the advanced equipment to produce, assembly and
-To ensure high accuracy.
Packing & Shipping:
Package conforms to the requirements of customs.