SANKON Building Materials Technology Co. is a one stop solutions
provider for autoclaved aerated concrete (AAC) production equipment
including complete AAC production lines.
We manufacture a wide range of building material machines,
including block making machines, concrete panel machines, dry
mortar machines, and more.
It is used for mixing aluminum powder.
1. Max outside size
Length:630mm Width:500mm Height:1142mm
Mixing drum capacity:V=0.052m3
4.Mixing speed:1390 r/min
The aluminum mixer is composed of mixing drum, mixing shaft and
The mixing drum is cylindrical and the bottom shaped like a
truncated cone, which is easy to discharge. It is made of steel and
the sprue gate is controlled by the pneumatic butterfly valve
The mixing shaft is composed of driven wheel, bearing base and
The aluminum powder mixer is driver by the motor which rotate as
clockwise direction, and drag the mixing shaft and agitator, and
make the material turn inside the drum, the mixing powder comes
down from the sprue gate and it is controlled by the butterfly
Adjust and trial runnin:
Adjust the parts below after the installment
a.Tighten the motor belt
b.Tighten the gasket screw.
a.The motor runs stably and rotate as clockwise direction.
b.The mixing drum is stable.
c.The shaft is easy to run, no abnormal sound
d.The pneumatic butterfly valve well works.
Maintenance and repair:
Clean the mixing drum and mixing shaft once a week, tighten the
gasket of the shaft.
Disassemble the sprue gate and clean it and pneumatic butterfly
valve and the pipe once per month.